News

Home > News > Company News

What is the operation principle of the automatic labeling machine center?

Release time: 2020-05-08

Source: Pack Easy

Browse volume: 22

What is the operation principle of the automatic labeling machine center?

  When using any kind of machinery, we must understand its operating principle, especially when using an automatic labeling machine and a semi-automatic labeling machine. Having more information can prevent problems. The correct application method and maintenance are very important, so keep this in mind during the application process. Today's editor will come with us to learn what is the operation principle of the labeling machine center, as follows:

  According to the information learned by Paiyi, the initial operation process of the labeling machine is that the box is fed to the labeling machine at a constant speed on the conveyor belt. Because of its convenience, it brings great tremendous convenient. The mechanical fixing device separates the boxes by a fixed distance and pushes the boxes along the direction of the conveyor belt. The mechanical system of the labeling machine includes a driving wheel, a labeling wheel, and a reel. At this time, the driving wheel intermittently drags the label tape to move, the label tape is pulled out from the reel, and the label tape is pressed against the box by the labeling wheel, and the operation is completed. An open-loop displacement control is used on the reel to maintain the tension of the label tape. Since the labels are tightly connected to each other on the label tape, the label tape must start and stop continuously.

  We can know that the label is attached to the box when the labeling wheel and the box move at the same speed. When the conveyor belt reaches a certain orientation, the drive belt of the label belt will speed up to match the speed of the conveyor belt. After the label is attached, it will be decelerated to connect.

  Sometimes because the label may slide, it has a registered mark on it to ensure that each label is placed correctly, and this posture will not appear thick. We sometimes have doubts about the registration mark at some time. In fact? The registration mark is read by a sensor. During the deceleration phase of the label tape, the drive wheel will adjust the orientation from the beginning to modify any orientation error on the label tape.